N7828A VXG Microwave Signal Generator Calibration Application

发布日期	版本	版本说明
2026-03-25	E.03.07	Update specification data for Maximum Output Power for M9384B channels with option 1ES - Disable Harmonic Spurious verification test for M9384B channels with option 1ES

发布日期	版本
2026-03-25	E.03.07

Version Description
Update specification data for Maximum Output Power for M9384B channels with option 1ES - Disable Harmonic Spurious verification test for M9384B channels with option 1ES

发布日期	版本	版本说明
2025-03-12	E.03.06	Updating specification data for Maximum Output Power for M9484C channels with 1EC option between 43 GHz and 50 GHz

发布日期	版本
2025-03-12	E.03.06

版本说明
Updating specification data for Maximum Output Power for M9484C channels with 1EC option between 43 GHz and 50 GHz

如何下载

Close all applications.
Download application .exe file to the PC desktop.

如何安装

Download the Setup.exe file to the PC desktop.
Run Setup.exe as follows: Right-click the Setup.exe file and select “Run as Administrator” to start the installation.
Follow the instructions on the screen to install the Test Management Environment.

Important Note: After the initial N7800A TME installation, be sure to launch the application in Normal mode. Do not launch in Administrator mode. Administrator mode is only used for the initial installation of the N7800A TME application.

颁发许可证

Requires a License
To obtain a key contact your local Keysight Technologies Sales Representative.

支持文档

Download

Installs on: PC

操作系统

Windows 10

Minimum Requirements to Run TME N78xxA Application Software:

TME revision E.03.91 or higher
Check individual N78xxA Application’s ReadMe files for specific requirements

前提要求

支持的仪器

M9384B
M9384C

发布日期	版本	版本说明
2024-11-11	E.03.05	- Updating specification data for Maximum Output Power for M9484C channels with 532, 544, or 554 option - Altered a check in the framework to allow the use of Signal Analyzers without option MPB for Power Level Accuracy test.

发布日期	版本
2024-11-11	E.03.05

版本说明
- Updating specification data for Maximum Output Power for M9484C channels with 532, 544, or 554 option - Altered a check in the framework to allow the use of Signal Analyzers without option MPB for Power Level Accuracy test.

如何下载

Close all applications.
Download application .exe file to the PC desktop.

如何安装

Download the Setup.exe file to the PC desktop.
Run Setup.exe as follows: Right-click the Setup.exe file and select “Run as Administrator” to start the installation.
Follow the instructions on the screen to install the Test Management Environment.

Important Note: After the initial N7800A TME installation, be sure to launch the application in Normal mode. Do not launch in Administrator mode. Administrator mode is only used for the initial installation of the N7800A TME application.

颁发许可证

Requires a License
To obtain a key contact your local Keysight Technologies Sales Representative.

支持文档

Download

Installs on: PC

操作系统

Windows 10

Minimum Requirements to Run TME N78xxA Application Software:

TME revision E.03.91 or higher
Check individual N78xxA Application’s ReadMe files for specific requirements

前提要求

支持的仪器

M9384B
M9384C

发布日期	版本	版本说明
2023-11-20	E.03.04	- Disabling Single Sideband Phase Noise for M9384B UUTs with ST5 and serial numbers before the 6033 serial number break - Fixing problem with Power Level Accuracy that caused it to over report power level error on UUTs with option 1EH

发布日期	版本
2023-11-20	E.03.04

版本说明
- Disabling Single Sideband Phase Noise for M9384B UUTs with ST5 and serial numbers before the 6033 serial number break - Fixing problem with Power Level Accuracy that caused it to over report power level error on UUTs with option 1EH

如何下载

Close all applications.
Download application .exe file to the PC desktop.

如何安装

Download the Setup.exe file to the PC desktop.
Run Setup.exe as follows: Right-click the Setup.exe file and select “Run as Administrator” to start the installation.
Follow the instructions on the screen to install the Test Management Environment.

Important Note: After the initial N7800A TME installation, be sure to launch the application in Normal mode. Do not launch in Administrator mode. Administrator mode is only used for the initial installation of the N7800A TME application.

颁发许可证

Requires a License
To obtain a key contact your local Keysight Technologies Sales Representative.

支持文档

Download

Installs on: PC

操作系统

Windows 10

Minimum Requirements to Run TME N78xxA Application Software:

TME revision E.03.91 or higher
Check individual N78xxA Application’s ReadMe files for specific requirements

前提要求

支持的仪器

M9384B
M9384C

发布日期	版本	版本说明
2023-10-27	E.03.02	- Correct a problem with Harmonic Spurious test that caused uncertainty to be undefined for spurs at 19.5 GHz on 20 GHz UUTs without 1EB - Correct a problem with Power Level Accuracy test that caused inflated power level accuracy errors at lower power levels.

发布日期	版本
2023-10-27	E.03.02

版本说明
- Correct a problem with Harmonic Spurious test that caused uncertainty to be undefined for spurs at 19.5 GHz on 20 GHz UUTs without 1EB - Correct a problem with Power Level Accuracy test that caused inflated power level accuracy errors at lower power levels.

如何下载

Close all applications.
Download application .exe file to the PC desktop.

如何安装

Download the Setup.exe file to the PC desktop.
Run Setup.exe as follows: Right-click the Setup.exe file and select “Run as Administrator” to start the installation.
Follow the instructions on the screen to install the Test Management Environment.

Important Note: After the initial N7800A TME installation, be sure to launch the application in Normal mode. Do not launch in Administrator mode. Administrator mode is only used for the initial installation of the N7800A TME application.

颁发许可证

Requires a License
To obtain a key contact your local Keysight Technologies Sales Representative.

支持文档

Download

Installs on: PC

操作系统

Windows 10

Minimum Requirements to Run TME N78xxA Application Software:

TME revision E.03.91 or higher
Check individual N78xxA Application’s ReadMe files for specific requirements

前提要求

支持的仪器

M9384B
M9384C

发布日期	版本	版本说明
2023-10-17	E.03.01	- Removed angle brackets from channel specific option strings - Fixed two issues with tests that use Oscilliscope as ETE. - Improved Phase Noise Measurement Uncertainties - Fixed database problem that resulted in leaving the Signal Analyzer off the ETE list for Maximum Output Power for M9484C UUTs

发布日期	版本
2023-10-17	E.03.01

版本说明
- Removed angle brackets from channel specific option strings - Fixed two issues with tests that use Oscilliscope as ETE. - Improved Phase Noise Measurement Uncertainties - Fixed database problem that resulted in leaving the Signal Analyzer off the ETE list for Maximum Output Power for M9484C UUTs

如何下载

Close all applications.
Download application .exe file to the PC desktop.

如何安装

Download the Setup.exe file to the PC desktop.
Run Setup.exe as follows: Right-click the Setup.exe file and select “Run as Administrator” to start the installation.
Follow the instructions on the screen to install the Test Management Environment.

Important Note: After the initial N7800A TME installation, be sure to launch the application in Normal mode. Do not launch in Administrator mode. Administrator mode is only used for the initial installation of the N7800A TME application.

颁发许可证

Requires a License
To obtain a key contact your local Keysight Technologies Sales Representative.

支持文档

Download

Installs on: PC

操作系统

Windows 10

Minimum Requirements to Run TME N78xxA Application Software:

TME revision E.03.91 or higher
Check individual N78xxA Application’s ReadMe files for specific requirements

前提要求

支持的仪器

M9384B
M9384C

发布日期	版本	版本说明
2022-11-01	E.02.00	Initial release for Adjustments for the M9384B. Added support for the N9040B UXA Signal Analyzer for Performance Verification. Added support for the N5511A Phase Noise Measurement System for Performance Verification. Updated Peformance Verification specifications to reflect the latest released datasheet.

发布日期	版本
2022-11-01	E.02.00

版本说明
Initial release for Adjustments for the M9384B. Added support for the N9040B UXA Signal Analyzer for Performance Verification. Added support for the N5511A Phase Noise Measurement System for Performance Verification. Updated Peformance Verification specifications to reflect the latest released datasheet.

如何下载

Close all applications.
Download application .exe file to the PC desktop.

如何安装

Download the Setup.exe file to the PC desktop.
Run Setup.exe as follows: Right-click the Setup.exe file and select “Run as Administrator” to start the installation.
Follow the instructions on the screen to install the Test Management Environment.

Important Note: After the initial N7800A TME installation, be sure to launch the application in Normal mode. Do not launch in Administrator mode. Administrator mode is only used for the initial installation of the N7800A TME application.

颁发许可证

Requires a License
To obtain a key contact your local Keysight Technologies Sales Representative.

支持文档

Download

Installs on: PC

操作系统

Windows 10

Minimum Requirements to Run TME N78xxA Application Software:

TME revision E.03.91 or higher
Check individual N78xxA Application’s ReadMe files for specific requirements

前提要求

支持的仪器

M9384B

发布日期	版本	版本说明
2022-02-01	E.01.01	Specification updates were made to the 10 MHz Output Power, Power Level Accuracy, Harmonics, Subharmonics, and Single Sideband Phase Noise tests to match the current datasheet. Fixed mis-spelling on the Video Feedthrough test report. Removed Self Test from the test list and Help due to the firmware incorrectly reporting the test result status. The Self Test will be re-enabled when the firmware has been updated to properly report the Self Test result status.

发布日期	版本
2022-02-01	E.01.01

版本说明
Specification updates were made to the 10 MHz Output Power, Power Level Accuracy, Harmonics, Subharmonics, and Single Sideband Phase Noise tests to match the current datasheet. Fixed mis-spelling on the Video Feedthrough test report. Removed Self Test from the test list and Help due to the firmware incorrectly reporting the test result status. The Self Test will be re-enabled when the firmware has been updated to properly report the Self Test result status.

如何下载

Close all applications.
Download application .exe file to the PC desktop.

如何安装

Download the Setup.exe file to the PC desktop.
Run Setup.exe as follows: Right-click the Setup.exe file and select “Run as Administrator” to start the installation.
Follow the instructions on the screen to install the Test Management Environment.

Important Note: After the initial N7800A TME installation, be sure to launch the application in Normal mode. Do not launch in Administrator mode. Administrator mode is only used for the initial installation of the N7800A TME application.

颁发许可证

Requires a License
To obtain a key contact your local Keysight Technologies Sales Representative.

支持文档

Download

Installs on: PC

操作系统

Windows 10

Minimum Requirements to Run TME N78xxA Application Software:

TME revision E.03.91 or higher
Check individual N78xxA Application’s ReadMe files for specific requirements

前提要求

支持的仪器

M9384B