N7850A Power Sensors Calibration Application

N7850A Power Sensors Calibration Application

是德建议使用最新的版本，其中包括最新的漏洞修复和安全补丁
发布日期 版本 版本说明
2026-07-08 E.07.04 - Added support for N4690C Electronic Calibration Modules - Added support for E9304A Opt H18 as an alternative test equipment for UUT E9304A - Updated Store Calibration Factor test to update/write the Calibration Date in the EEPROM of the N848x CFT power sensors - Updated the Calibration Factor Deviation test to exclude the 50 MHz Calibration Factor comparison for the N8486AR and N8486AQ power sensors. - Updated the report template - Use the new calibration standards. Remove “Undetermined” result type and replace with Passed ‡ / Failed ‡. - Report the measurement uncertainty with 2 significant figures - Updated the micro scaling factor from u to μ
发布日期 版本
2026-07-08 E.07.04
Version Description
- Added support for N4690C Electronic Calibration Modules - Added support for E9304A Opt H18 as an alternative test equipment for UUT E9304A - Updated Store Calibration Factor test to update/write the Calibration Date in the EEPROM of the N848x CFT power sensors - Updated the Calibration Factor Deviation test to exclude the 50 MHz Calibration Factor comparison for the N8486AR and N8486AQ power sensors. - Updated the report template - Use the new calibration standards. Remove “Undetermined” result type and replace with Passed ‡ / Failed ‡. - Report the measurement uncertainty with 2 significant figures - Updated the micro scaling factor from u to μ

如何下载

  • Close all applications.
  • Download application .exe file to the PC desktop.

如何安装

  1. Download the Setup.exe file to the PC desktop.
  2. Run Setup.exe as follows: Right-click the Setup.exe file and select “Run as Administrator” to start the installation.
  3. Follow the instructions on the screen to install the Test Management Environment.
Important Note: After the initial N7800A TME installation, be sure to launch the application in Normal mode. Do not launch in Administrator mode. Administrator mode is only used for the initial installation of the N7800A TME application.

颁发许可证

  • Requires a License
    To obtain a key contact your local Keysight Technologies Sales Representative.

支持文档

Download

Installs on: PC

操作系统

  • Windows 10/11

Minimum Requirements to Run TME N78xxA Application Software:
 

  • TME revision E.04.09 or higher
  • Check individual N78xxA Application’s ReadMe files for specific requirements

前提要求

支持的仪器

  • E9304A, E9304A Opt H18, N8481A Opt STD, CFT, 200, N8482A Opt STD, CFT, N8485A Opt STD, CFT, 033, N8487A Opt STD, CFT, N8481B Opt STD, CFT, N8481H Opt STD, CFT, N8482B Opt STD, CFT, N8482H Opt STD, CFT, N8486AQ Opt STD, CFT, N8486AR Opt STD, CFT, N8488A Opt STD, 8481A,8482A,8485A,8485D,8487A

如何下载

  • Close all applications.
  • Download application .exe file to the PC desktop.

如何安装

  1. Download the Setup.exe file to the PC desktop.
  2. Run Setup.exe as follows: Right-click the Setup.exe file and select “Run as Administrator” to start the installation.
  3. Follow the instructions on the screen to install the Test Management Environment.
Important Note: After the initial N7800A TME installation, be sure to launch the application in Normal mode. Do not launch in Administrator mode. Administrator mode is only used for the initial installation of the N7800A TME application.

颁发许可证

  • Requires a License
    To obtain a key contact your local Keysight Technologies Sales Representative.

支持文档

Download

Installs on: PC

操作系统

  • Windows 10

Minimum Requirements to Run TME N78xxA Application Software:
 

  • TME revision E.03.91 or higher
  • Check individual N78xxA Application’s ReadMe files for specific requirements

前提要求

支持的仪器

  • E9304A, E9304A Opt H18, N8481A Opt STD, CFT, 200, N8482A Opt STD, CFT, N8485A Opt STD, CFT, 033, N8487A Opt STD, CFT, N8481B Opt STD, CFT, N8481H Opt STD, CFT, N8482B Opt STD, CFT, N8482H Opt STD, CFT, N8486AQ Opt STD, CFT, N8486AR Opt STD, CFT, N8488A Opt STD, 8481A,8482A,8485A,8485D,8487A

如何下载

  • Close all applications.
  • Download application .exe file to the PC desktop.

如何安装

  1. Download the Setup.exe file to the PC desktop.
  2. Run Setup.exe as follows: Right-click the Setup.exe file and select “Run as Administrator” to start the installation.
  3. Follow the instructions on the screen to install the Test Management Environment.
Important Note: After the initial N7800A TME installation, be sure to launch the application in Normal mode. Do not launch in Administrator mode. Administrator mode is only used for the initial installation of the N7800A TME application.

颁发许可证

  • Requires a License
    To obtain a key contact your local Keysight Technologies Sales Representative.

支持文档

Download

Installs on: PC

操作系统

  • Windows 10

Minimum Requirements to Run TME N78xxA Application Software:
 

  • TME revision E.03.91 or higher
  • Check individual N78xxA Application’s ReadMe files for specific requirements

前提要求

支持的仪器

  • E9304A, E9304A Opt H18, N8481A Opt STD, CFT, 200, N8482A Opt STD, CFT, N8485A Opt STD, CFT, 033, N8487A Opt STD, CFT, N8481B Opt STD, CFT, N8481H Opt STD, CFT, N8482B Opt STD, CFT, N8482H Opt STD, CFT, N8486AQ Opt STD, CFT, N8486AR Opt STD, CFT, N8488A Opt STD, 8481A,8482A,8485A,8485D,8487A

如何下载

  • Close all applications.
  • Download application .exe file to the PC desktop.

如何安装

  1. Download the Setup.exe file to the PC desktop.
  2. Run Setup.exe as follows: Right-click the Setup.exe file and select “Run as Administrator” to start the installation.
  3. Follow the instructions on the screen to install the Test Management Environment.
Important Note: After the initial N7800A TME installation, be sure to launch the application in Normal mode. Do not launch in Administrator mode. Administrator mode is only used for the initial installation of the N7800A TME application.

颁发许可证

  • Requires a License
    To obtain a key contact your local Keysight Technologies Sales Representative.

支持文档

Download

Installs on: PC

操作系统

  • Windows 10

Minimum Requirements to Run TME N78xxA Application Software:
 

  • TME revision E.03.91 or higher
  • Check individual N78xxA Application’s ReadMe files for specific requirements

前提要求

支持的仪器

  • E9304A, E9304A Opt H18, N8481A Opt STD, CFT, 200, N8482A Opt STD, CFT, N8485A Opt STD, CFT, 033, N8487A Opt STD, CFT, N8481B Opt STD, CFT, N8481H Opt STD, CFT, N8482B Opt STD, CFT, N8482H Opt STD, CFT, N8486AQ Opt STD, CFT, N8486AR Opt STD, CFT, N8488A Opt STD, 8481A,8482A,8485A,8485D,8487A
SHOW MORE