在更新仪器固化软件之前，需要先切断功率通道输入的电源。连接器可以留在原处，但是此时应没有电流或电压信号通过它们进入功率分析仪。

是德建议使用最新的版本，其中包括最新的漏洞修复和安全补丁
发布日期 版本 版本说明
2017-03-15 2.37 Changes the remote response to the Continuous Whole-Cycle Analysis (CWA) query if the measurement has not been initiated or was unable to complete, and resolves minor defects.
发布日期 版本
2017-03-15 2.37
版本说明
Changes the remote response to the Continuous Whole-Cycle Analysis (CWA) query if the measurement has not been initiated or was unable to complete, and resolves minor defects.

如何下载

  • Click the download button and either save the file to a USB flash drive or save the file to your computer and then copy it to a USB flash drive.

如何安装

  • To perform the firmware update:

    1. Put the USB flash drive with the *.KUP file into one of the front-panel USB ports.
    2. Press [Utility] > File Explorer.
    3. Use the first softkey and the Entry knob to browse to the *.KUP file on the USB drive.
    4. Press the Load File softkey.
      ­

  • The firmware update utility will run, and the instrument will cycle power to start running the new firmware.

颁发许可证

  • 不要求具有许可证

支持文档

下载

安装到： Instrument

前提要求

  • 无此信息

支持的仪器

  • PA2201A, PA2203A

如何下载

  • Click the download button and either save the file to a USB flash drive or save the file to your computer and then copy it to a USB flash drive.

如何安装

  • To perform the firmware update:

    1. Put the USB flash drive with the *.KUP file into one of the front-panel USB ports.
    2. Press [Utility] > File Explorer.
    3. Use the first softkey and the Entry knob to browse to the *.KUP file on the USB drive.
    4. Press the Load File softkey.
      ­

  • The firmware update utility will run, and the instrument will cycle power to start running the new firmware.

颁发许可证

  • 不要求具有许可证

支持文档

下载

安装到： Instrument

前提要求

  • None

支持的仪器

  • PA2201A, PA2203A
SHOW MORE