技术资料
Specifications:
These specifications describe the performance parameters and the main specifications of the WJ1000A mmWaveJudge Remote Receiver.
WJ1000A mmWaveJudge remote receiver
SPECS |
IF output |
LO input |
RF input |
|||
Receiver |
Freq (GHz) |
Connector |
Freq (GHz) |
Connector |
Freq (GHz) (IF+LO*2) |
Connector |
24-30 GHz |
3-11 |
2.92 mm |
24-30 |
2.92 mm |
24-30 |
1.85 mm |
37-42.5 GHz |
7.4-8 |
2.92 mm |
37-42.5 |
2.92 mm |
37-42.5 |
1.85 mm |
Specification |
Data |
Receiver |
24 GHz to 30 GHz band and 37 GHz to 42.5 GHz band |
mmWave bandwidth |
800 MHz |
mmWave input IP3 |
3-5 dbm |
mmWave input ideal power level |
<-25 dbm for good linearity |
mmWave input P1 db |
-9 dbm |
mmWave input (50 ohms single-ended) return loss |
-13 db |
SSB noise figure |
6 db |
phase noise (normalized to 4 GHz) |
Next slide |
conversion gain |
Next slide |
absolute maximum ratings for mmWave input power |
0 dbm |
LO input |
2.6 GHz to 4.7 GHz provided from Sanjole 5G card LO OUT port |
IF output |
2.6 GHz to 4.7 GHz fed into Sanjole 5G card RF IN port |
Power |
2.6 GHz to 4.7 GHz fed into Sanjole 5G card RF IN port |
Specification |
Data |
Connectors |
LO: 2.92 mm female connector, standard thread, 50 ohms IF: 2.92 mm female connector, standard thread, 50 ohms mm: 2.92 mm female connector, standard thread, 50 ohms USB: type C |
Operation |
via WaveJudge 5000 base unit software residing on connected PC |
Physical dimensions |
3”W X 2”H X 0.7”D (7.62 cm X 5.08 cm X 1.778 cm) |
×
请销售人员联系我。
*Indicates required field
感谢您!
A sales representative will contact you soon.